Register Online - Add to Cart

Credits

Sponsored by Lorman Education
Product ID: 405318EAU
 
Credit & Course Provided by:

Understanding the Construction Bidding Process

OnDemand Webinar (86 minutes)

Credits sponsored by Lorman Education

This course was last revised on October 15, 2019.

  • AIA 1.25
     
  • Lorman Education Services is a registered provider of AIA-approved continuing education under Provider Number J2016. This course is approved for 1.25 Learning Unit hour(s). Prerequisite: None, Program Level: Intermediate: Advanced Preparation: None All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
     
  • AK ENG 1.0
     
  • This Ondemand program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0. *Please check the rules and requirements in your state for compliance.
     
  • AL ENG
     
  • This Ondemand program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • AR ENG
     
  • This Ondemand program is applicable for 1.4 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • FL ENG 1.0
     
  • This course has been approved for 1.0 PDH by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This Ondemand program is applicable through the Georgia State Board of Registration for Professional Engineers.for 1.4 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • IA ENG
     
  • This Ondemand program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.*
     
  • ID ENG 1.5
     
  • This Ondemand program is applicable for 1.5 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • IL ENG 1.5
     
  • This program is applicable for 1.5 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.7
     
  • This Ondemand program is applicable for 1.7 professional development hours through the Indiana State Board for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • KY ENG 1.4
     
  • This Ondemand program is applicable for 1.4 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.5 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.0
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
     
  • ME ENG 1.0
     
  • This ondemand program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.* *Please check the rules and requirements in your state for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 1.5
     
  • This ondemand course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MS ENG
     
  • This ondemand course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MT ENG 1.0
     
  • This ondemand course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NC ENG 1.5
     
  • Lorman Business Center, Inc. is an approved sponsor of the North Carolina State Board of Examiners for Engineers and Surveyors. This course qualifies for 1.5 professional development hours for engineers.
     
  • ND ENG 1.5
     
  • Lorman Education Services is an approved provider through the North Dakota State Board of Registration for Engineers and Land Surveyors. This seminar qualifies for 1.5 of continuing professional competence for engineers.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • OH ENG
     
  • This ondemand course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.* *Please check the rules and requirements in your state for compliance
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.7
     
  • This program is applicable for 1.7 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.0
     
  • This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This Ondemand course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.5
     
  • This program is applicable for 1.5 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.5
     
  • This course is applicable for a maximum of 1.5 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WY ENG 1.7
     
  • This course is applicable for 1.7 professional development hours for Wyoming engineers.* *Please check the rules and requirements in your state for compliance.
     
  • ISM 1.25
     
  • Participants who successfully complete this program will receive 1.25 hours of continuing education. They may be applied toward ISM CPSM, CPSD or C.P.M. recertification. ISM's consent to approve hours for this educational event is not an endorsement of this program or its content by ISM.
     

This course is approved by the AIC Constructor Certification Commission for Continuing Professional Development (CPD) Credits. Please contact Lorman Education Services at [email protected] for the number of approved CPD credits if desired.

To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill the following requirements:

  • Those applying for AIA and HRCI must view 100% of the program and answer the questions following the program.
Call 1-866-352-9540 for further credit information.