Register Online - Add to Cart

Credits

Sponsored by Lorman Education
Only registered attendee will receive continuing education credit.
Product ID: 407012
 
Credit & Course Provided by:

Understanding AIA Document D503™-2020 Guide for Sustainable Projects

Live Webinar
October 28, 2020
1:00 pm ET (12 pm CT, 11 am MT, 10 am PT)
1 hour 30 minutes
Live Webinar$219Register Now

Credits sponsored by Lorman Education

Only registered attendee will receive continuing education credit. Additional attendees can receive continuing education credits at a discounted price.Call 1-866-352-9540 for further credit information and details.

  • AIA 1.5
     
  • Lorman Education Services is a registered provider of AIA-approved continuing education under Provider Number J2016. This course is approved for 1.5 Learning Unit hour(s). Prerequisite: None, Program Level: Intermediate: Advanced Preparation: None All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
     
  • AR CLE 1.5
     
  • This course has been approved for 1.5 hours of CLE by the Arkansas CLE Board.
     
  • Arizona CLE 1.5
     
  • The State Bar of Arizona does not approve or accredit CLE activities for the Mandatory Continuing Legal Education requirement. This activity may qualify for up to 1.5 hours toward your annual CLE requirement for the State Bar of Arizona.
     
  • CA MCLE 1.5
     
  • Lorman Business Center, LLC. is a State Bar of California approved MCLE sponsor and this course qualifies for 1.5 CLE hours of participatory credit.
     
  • CT CLE 1.5
     
  • Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.5 CLE credit(s).
     
  • HI CLE 1.5
     
  • This program was approved by the Hawaii State Board of Continuing Legal Education for 1.5 CLE credit hours.
     
  • IL CLE 1.5
     
  • This course was approved for a total of 1.5 hours of MCLE Credit by the Illinois MCLE Board.
     
  • ME CLE 1.5
     
  • This course has been approved by the State of Maine Board of Overseers of the Bar. Lawyers who complete this course shall receive 1.5 hours of CLE credit under M. Bar R. 12.
     
  • NH MCLE 1.5
     
  • NH MCLE does not approve or accredit CLE activities for the NH Minimum CLE requirement. Lorman Education Services believes this course meets the requirement of NH Supreme Court Rule 53 and may qualify for CLE credit(s). Program Length: 90 Minutes.
     
  • NJ CLE 1.8
     
  • This program has been approved by the Board on Continuing Legal Education of the Supreme Court of New Jersey for 1.8 hours of total CLE credit.
     
  • NV CLE 1.5
     
  • This program has been approved by the Nevada Board of Continuing Legal Education for 1.5 CLE hours.
     
  • PA CLE 1.5
     
  • This Distance Learning program has been approved by the Pennsylvania Continuing Legal Education Board for 1.5 hours of substantive law, practice and procedure CLE credit.
     
  • RI CLE 1.5
     
  • This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.5 hours of CLE credit.
     
  • VT CLE 1.5
     
  • This program has been approved by the Mandatory Continuing Legal Education Board of Vermont for 1.5 hours of CLE credit.
     
  • WA CLE 1.5
     
  • This program has been approved by the Washington State Board of Continuing Legal Education for 1.5 hours of Law & Legal Procedure credit.
     
  • WI CLE 1.5
     
  • This program has been approved by the Board of Bar Examiners for 1.5 hours for use toward the Wisconsin Mandatory CLE requirement.
     
  • WV MCLE 1.8
     
  • This program has been approved by the West Virginia State Bar MCLE Commission for 1.8 MCLE hours.
     
  • AK ENG 1.5
     
  • This program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.5.
     
  • AL ENG
     
  • This program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors. Please note: The Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors does not preapprove courses.
     
  • FL ENG 1.0
     
  • This course has been approved for 1.0 PDH by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This program is applicable for professional development hours through the Georgia State Board of Registration for Professional Engineers.
     
  • IA ENG
     
  • This program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.
     
  • ID ENG 1.5
     
  • This program is applicable for 1.5 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.
     
  • IL ENG 1.5
     
  • This program is applicable for 1.5 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.8
     
  • This program is applicable for 1.8 professional development hours through the Indiana State Board for Professional Engineers.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.5 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.5
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.5 professional development hours.
     
  • ME ENG 1.5
     
  • This program is applicable for a maximum of 1.5 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.
     
  • MI ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers in Michigan through the Michigan Department of Licensing and Regulatory Affairs Corporations, Securities & Commercial Licensing Bureau.* *Please check the department rules and requirements for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 2.0
     
  • This course is applicable for 2.0 PDH's through the Missouri Board for Professional Engineers.
     
  • MS ENG
     
  • This course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.
     
  • ND ENG 1.5
     
  • Lorman Education Services is an approved provider through the North Dakota State Board of Registration for Engineers and Land Surveyors. This seminar qualifies for 1.5 of continuing professional competence for engineers.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.5
     
  • This course is applicable for 1.5 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • OH ENG
     
  • This course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.8
     
  • This program is applicable for 1.8 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.5
     
  • This course is applicable for 1.5 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.5
     
  • This program is applicable for 1.5 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.5
     
  • This course is applicable for a maximum of 1.5 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     

This course is approved by the AIC Constructor Certification Commission for Continuing Professional Development (CPD) Credits. Please contact Lorman Education Services at [email protected] for the number of approved CPD credits if desired.

Registration

Live Webinar$219Register Now